Video review by woodworking instructor Ron Herman. This video shows our complete bench with Eclipse vises installed and dog holes. You can vist Ron's web site by going to http://www.woodworkingwithron.com
One Rail Benches utilize our One Rail Brackets which eliminates one of the bench rails to make it easier to sit at the bench or use the underside for storage. Our One Rail Bench kits come with two Adjust-A-Bench Legs, your choice of 60x30 or 72x30 1 3/4" thick hard maple tops, our One Rail Brackets and one red oak rail with two threaded rods cut to length, 28" Caster Package, all hardware needed for assembly, and instructions. Instructional videos on how to assemble the bench are located in the Video section of this web site.
To this you can add two 7" Eclipse Vices pre-installed on the top and a line of 3/4" dog holes drilled into your top in line with the tail vise.
All complete Adjust-A-Bench kits are packed flat, crated, weigh between 250 - 300 pounds depending on accessories and shipped common carrier. Delivery Appointment and Lift Gate services are provided to residential customers.
Complete bench packages typically ship within 5-7 business days.
All prices listed below include the $350.00 shipping charge
|60x30 One Rail Bench Configurations||Price|
|60x30 w/28" Caster Package||$1435.00|
|60x30 w/28" Casters, 2 Eclipse Vises & 1 Row of Dog Holes||$1785.00|
|72x30 One Rail Bench Configurations||Price|
|72x30 w/28" Caster Package||$1485.00|
|72x30 w/28" Casters, 2 Eclipse Vises & 1 Row of Dog Holes||$1835.00|
Don't see what you want here? Custom bench top sizes and configurations are available. Call us at 609-882-3300 for a price quote.
NOTE! If ordering a bench with vises AND you are left-handed, please email us after ordering so we can place your vices correctly.
7” Eclipse Vise has a quick-action lever which disengages the vise screw and permits instant adjustment to any point along the vise’s capacity. This unique design characteristic ensures a smooth, efficient operation that will make this vise one of the most versatile and frequently used tools in your workshop. Eclipse vises feature heavy cast iron jaws and solid steel slide rods for a lifetime of rugged use, and the vise jaws are toed in to assure positive clamping, even under the heaviest of clamping pressure. The large jaw opening allows for outfitting the cast jaws with wider, heavier wooden jaws for the increased clamping pressure necessary to firmly secure heavy workpieces. Designed with the woodworker in mind, the built-in dog may be used in combination with a bench dog to offer alternate uses. Features a jaw width of 7”, max opening of 7-7/8”, and quick release mechanism.
Bench Dog Holes are a line of 3/4 inch dog holes drilled along one length of bench top in line with the tail vise dog.